Mobile Room UVC Germicidal Solutions for Healthcare

ARTZ 2.0® Mobile Room UVC Germicidal Solutions for Healthcare

The ARTZ 2.0® (Automatically Reliably Targeting Zero) Mobile Room Germicidal UVC Solution has designed with the goal of targeting zero infections in the environment around the patient. The ARTZ 2.0® is less expensive, more efficient, and more effective than any other comparable mobile room germicidal UV decontamination device in the marketplace. We recommend using it as the final step during terminal cleaning of patient rooms or surgical suites, or in any other areas of your facilities where harmful pathogens may be present.

Here's what makes the ARTZ 2.0® so unique:

Affordable

  • Economically-priced high-end system; Inquire today to learn more.
  • Individually validated medical UV lamps are rated for 12,000 hours, which exceeds all other mobile room UVC devices.

Fast

  • Sets up quickly with any web-enabled device of your choosing (mobile phone, tablet or laptop).
  • Features high-output UVC flux.
  • Disinfects high touch non-critical surfaces from pathogens in minutes.

Effective

  • Preset dosage recipes are built in to the system to target desired microbes; if preferred, ARTZ 2.0® can be set manually to provide required dose.
  • 3 log (99.9%) pathogen reduction at 10 feet distance to the object for: coronavirus in less than 2 minutes; MRSA in less than 3 minutes; C.diff. in less than 5 minutes.
  • Delivers balanced and uniform UVC flux to surfaces and air; automatically delivers dose needed to reduce pathogens that include:
    • Methicillin resistant Staphylococcus aureus (MRSA)
    • Clostridium difficile – spore forming bacteria
    • Acinetobacter baumannnii
    • Vancomycin resistant enterococcus (VRE)
    • Extended Spectrum Beta Lactamase Producers (ESBL) – gram negative bacteria
    • Influenza virus (Avian, Influenza A)
    • Other bacteria, virus, or fungi (please contact American Ultraviolet regarding microbes of interest not listed).

Safe

  • 360° motion sensors - ARTZ 2.0® automatically shuts off if room is entered for any reason during treatment.

Downloadable Data

  • Automatic document control data logging helps reduce or eliminate human error during data collection.
  • Wirelessly downloads acquired session data to a computer.
  • Measures productivity and time management.
  • The ARTZ 2.0® records session log-in, users, dates, device locations; device run time; device settings; reporting.

User-friendly

  • Easy-to-operate; Minimal training required.
  • Adjunct to standard terminal cleaning process.
  • Controlled by any web-enabled device of your choosing (mobile phone, tablet or laptop).
  • 360° handle for ease of transport.
  • Multiple languages available.

Green Technology

  • Produces no ozone or other secondary contaminants.
  • No additional chemicals necessary.
  • No waste is generated.

The ARTZ 2.0® can be controlled from the web-enabled device of your choosing (mobile phone, tablet or laptop) - so no need to worry about a lost, damaged, or stolen controller. Simply connect to the ARTZ 2.0's discrete Wi-Fi network, and log in to web-based controls that offer cycle logging, fault logging, and lamp status information.

MRS45-12 Mobile UV Unit

This unit uses 360 degree motion sensors as a safety precaution and features twelve (12), 45" slimline UVC lamps for maximum intensity. System controls are located directly on the unit, which allows utilization of a touchscreen with 3 pre programmed disinfection cycle times, and the option to manually set disinfection cycles times. The MRS45-12 delivers a lethal dose of UV-C energy. UV-C energy has been shown to reduce pathogens by 99.9%.1 An estimated 3-log (99.9%) pathogen reduction at 10 feet distance to an object can be estimated utilizing energy values compared against UVC output. Coronavirus (SARS) in less than 3 minutes; MRSA in less than 5 minutes; C. diff. in less than 8 minutes.

Features

  • 304 stainless steel construction.
  • 360° motion sensors for automatic shut-off.
  • Large, high quality, locking casters for ease of transport.
  • 120/220 Volt, 50/60 Hertz.
  • Formed stainless tube structure protects lamps and improves ability to handle and transport the unit.
  • Access panel for ease of maintenance.
  • Touchscreen controller with preset and manual disinfection.
  • 15 foot power cord.

Technical Specification

  • Weight: 90lbs.
  • Dimensions: 67"H x 26"W x 26"D.
  • Lamps: GML515 x 12.
  • Electrical Requirements:8A @ 120V & 4.5A @ 220V.

MRS33-8 Mobile UV Unit

This unit uses 360 degree motion sensors as a safety precaution and features eight (8), 33" slimline UVC lamps optically centered around a highly polished reflector for maximum intensity. System controls are located directly on the unit, which allows utilization of a touchscreen with 3 pre programmed disinfection cycle times, and the option to manually set disinfection cycles times. The MRS33-8 delivers a lethal dose of UV-C energy. UV-C energy has been shown to reduce pathogens by 99.9%.1 An estimated 3-log (99.9%) pathogen reduction at 10 feet distance to an object can be estimated utilizing energy values compared against UVC output.Coronavirus (SARS) in less than 5 minutes; MRSA in less than 10 minutes; C. diff. in less than 16 minutes.

Features

  • 304 stainless steel construction.
  • Motion sensor for 360-degree automatic shut-off.
  • Large, high quality, locking casters for ease of transport.
  • 120/220 Volt, 50/60 Hertz.
  • Formed stainless tube structure protects lamps and improves ability to handle and transport the unit.
  • Access panel for ease of maintenance.
  • Touchscreen controller with preset and manual disinfection.
  • 15 foot power cord.

Technical Specification

  • Weight: 90lbs.
  • Dimensions: 67"H x 26"W x 26"D.
  • Lamps: GML515 x 12.
  • Electrical Requirements:8A @ 120V & 4.5A @ 220V.

MRS14-4 Mobile UV Unit

This unit uses 360 degree motion sensors as a safety precaution and features four (4), 14" slimline UVC lamps optically centered around a highly polished reflector for maximum intensity. System controls are located directly on the unit, which allows utilization of an electronic timer with user selectable disinfection cycle times, and the option to manually set disinfection cycles times. The MRS14-4 delivers a lethal dose of UV-C energy. UV-C energy has been shown to reduce pathogens by 99.9%.1 An estimated 3-log (99.9%) pathogen reduction at 3 feet distance to an object can be estimated utilizing energy values compared against UVC output.Coronavirus (SARS) in less than 5 minutes; MRSA in less than 9 minutes; C. diff. in less than 15 minutes.

Features

  • 360° motion + IR sensor safety shut-off.
  • Type 304 stainless steel construction.
  • Remote control for cycle start/stop.
  • Eye hooks on top and bottom to suspend unit upright or upside down.
  • Programmable cycle timer.
  • Main power switch.

Technical Specification

  • Weight: 20 lbs (9 kg).
  • Dimensions: 25"h * 10"w * 10"d (64cm * 25cm * 25cm).
  • Lamps: qty (4) GML600A.
  • Electrical Requirements: 1A @ 120V.
  • Power Cord: 8ft (2.4m).
  • Construction: 304 stainless steel.

Questions??